Over Laminates
One mil clear PET overlaminate with an antimicrobial gloss topcoat. This topcoat is flexo, UV inkjet, and thermal transfer printable. This product can be used to produce film labels on press or this product can be used as a protective covering over high contact areas to help reduce the spread of germs. The coating contains non-toxic silver ions that have been shown effective against a broad spectrum of bacteria, mold and mildew.
This is a 3.75 mil clear polyolefin that can be used an an over laminate for floor graphics. The film is UL-410 certified. The adhesive is a solvent perm. The liner is a 90# layflat PK liner.
This is a two mil clear PET with a security hologram. The pattern is a "wallpaper" of squares. The adhesive is a heavy coat weight all temp adhesive. The liner is a 40# sck. This product is ideal for a window decal laminate when extra security is needed.
This matte laminate has a special top coating for laser, UV inkjet, and thermal transfer printers. It is also signature compatible. The matte coating by its nature is universal for laser and thermal transfer printers and will help reduce static. The adhesive is a general purpose perm with good wet out properties. The base liner is a 40# sck ideal for high speed die cutting.
Four mil clear PET with no coating. This is raw polyester film with an extra gloss appearance. This is laser compatible but cannot accept toner or signature. This film can also used to laminate label face stocks for extra durability. The adhesive is a general permanent with excellent wet out properties. The liner is a 3.4 mil clay coated lay flat.
This is a two mil clear PET with a heat seal adhesive applied to the face of the PET. The heat seal coating is a water based polyurethane chemistry. It is designed to function as a heat seal laminating adhesive. On the back of the PET is our #601 general perm and a 40# liner. You can laminate the PET to the substrate of your choice and expose the heat seal coating for further processing.
This is a 3/4 mil clear BOPP that can be printed and/or used as an over laminate. The all temp adhesive has excellent initial tack and wet out. The base liner is a 40# ideal for either die cutting or removing as a waste liner.
This is a two mil clear uncoated PET with a high bond durable solvent replacement acrylic adhesive. The adhesive works well on both high energy and low energy surfaces. A pattern dry edge is recommended to avoid adhesive build up on press. Ideal for use as an over laminate on a challenging substrate.
Special satin top coated laminate designed for tough low heat toner fusion desk top laser printers and thermal transfer printing. Less glossy than our SC topcoat but more glossy than having to use a matte. This top coating is used when you need the best toner anchorage possible on a lower heat printer or thermal transfer printer.
Gloss clear PET 2 mil laminate that is printable via UV Inkjet, flexo, and thermal transfer. The GL top coat can be laser printed in most machines as well. The adhesive is a general purpose perm with excellent clarity. The liner is a 40# sck with a smooth release.
Special holographic pattern on a 2 mil clear PET with permanent adhesive and a 40# liner. Ideal for adding low
security to an ID card or secure document. The "A" pattern is a sparkle holographic pattern and the "B" pattern is a square holographic pattern. OLHL050A (B) has a laser topcoat to make the face toner-receptive. Samples are available upon request.
1 mil clear PET with a digital matte topcoat. This film has a premium matte top coating for laser, LED, and thermal transfer imaging. This topcoat is used when a crisp, clean image is required by the end user. This topcoat is designed for color laser printers and will work very well in standard laser printers too. This film is also signature compatible. Other gauges are available upon request.
2 mil clear PET with a digital matte topcoat. This film has a premium matte top coating for laser, LED, and thermal transfer imaging. This topcoat is used when a crisp, clean image is required by the end user. This topcoat is designed for color laser printers and will work very well in standard laser printers too. This film is also signature compatible. Other gauges are available upon request.
1 mil clear PET with a soft-feel matte over-laminate for labels on press. This soft-feel matte topcoat is ideal when you are looking to enhance the look and feel of your label. Applications include prime labels and packaging labels. The topcoat exhibits excellent scratch resistance and chemical resistance. This face stock also has excellent durability, and along with our chemical and water resistant #50610 permanent adhesive, this product will have excellent wet-out properties.
1 mil clear PET with no coating. This is raw polyester film with an extra gloss appearance. The film is laser compatible but cannot accept toner or signature. This film can also be used to laminate label face stocks for extra durability.
Two mil clear PET with no coating. This is raw polyester film with an extra gloss appearance. This is laser compatible but cannot accept toner or signature. This film can also used to laminate label face stocks for extra durability.
This is a 3 mil clear PET that has not been treated and does not have a topcoat. The raw polyester film has an extra gloss appearance and is laser compatible, but cannot accept toner or signature. This film can also be used to laminate label face stocks for extra durability. The construction features an all-temp, high performance adhesive with a 50# SCK liner. Please note, the liner will be wound out unless otherwise noted.
This is a 4 mil clear PET that has not been treated and does not have a topcoat. The raw polyester film has an extra gloss appearance and is laser compatible, but cannot accept toner or signature. This film can also be used to laminate label face stocks for extra durability. The construction features a heavy coat weight all-temp, high performance adhesive with a 40# SCK liner. Please note, the liner will be wound out unless otherwise noted.
This is an NTC 4 mil clear PET overlaminate that can be used for a variety of applications. This product can be applied to high or low energy surfaces and has good resistance to heat, humidity, and mild plasticizers. The adhesive is a permanent solvent acrylic that maintains performance at high temperatures. The liner is a 54# DK.
This is a 5.0 mil clear PET over laminate. The adhesive is a high peel indoor/outdoor that exhibits excellent clarity. The liner is a 1.5 mil clear PET.
This is a two mil clear uncoated PET with a high bond rubber based acrylic adhesive. The adhesive works well on both high energy and low energy surfaces. A pattern dry edge is recommended to avoid adhesive build up on press. Ideal for use as an over laminate on a challenging substrate.
This is a 3/4 mil clear BOPP with an all temp permanent adhesive and a 40# liner. This is ideal for making clear labels that can be used to over laminate the substrate of your choice. This product is water resistant and tear resistant. Excellent clarity. Great for bottle labels too.
Super Clear PET for integral cards or labels on press. The laminate has premium special high gloss top coating for laser, flexo, and thermal transfer printing. This topcoat is used where ultimate clarity and gloss are a must and will still accept variable printing. Designed for color laser printers and HP Indigo. This is our most popular face laminate when high color print is used. Wet out is very good. This laminate makes your print look great. The adhesive is a premium outdoor grade that is skin safe and resistant to yellowing.
This is a 3.75 mil clear polyolefin that can be used an an over laminate for floor graphics. The film is UL-410 certified. The adhesive is a solvent perm. The liner is a 1.2 mil clear PET.
Piggyback Products
This is a piggy “half-back” label stock with permanent adhesive and a clear mid liner. Add the face stock of your choice on press to this clear mid liner. The clear mid liner will allow for high color graphics to be used on the document itself. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die.
This is a piggyback label stock with an image producing liner. The face stock is a bright white EDP that can be both press printed, hand written, or dot matrix printed. This is ideal when the customer needs a copy of the variable print that is imaged at the customer site. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. The standard perm will be somewhat removable from smooth surfaces like glass and shelving but permanent to corrugated or other paper surfaces.
This is a piggyback label stock with a standard perm adhesive for a wide variety of label applications. The face stock is a 60# digital matte that can be both press printed and digitally printed. The fast drying face stock is compatible with all inkjet systems as well as all laser systems. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. Ideal for printing high color with the inkjet system of your choice.
This is a piggyback construction with a 3.5 mil digital silk face stock that is inkjet, laser, and thermal transfer printable. The adhesive is general purpose perm. The mid liner is a 40# paper with the base liner being a 1.5 mil clear PET film.
This is a piggyback label stock with an ultra removable cling adhesive for window decal and other durable label applications. The face stock is a super clear PET that has a premium high gloss top coat. It can be press printed and laser printed. This topcoat is used where ultimate clarity and gloss is a must and it will still accept variable printing. Designed for color laser printers and HP Indigo. This is our most popular face stock when high color print is used. Wet out is also very good. This face stock makes your print look great.
This is laser printable latex face stock ideal for test tube and medical applications. The latex face stock is color laser printable, water resistant, and very durable. The adhesive is our standard general perm. Other adhesives are available upon request.
The face stock is a two mil metalized BOPP that is flexo and thermal transfer printable. The top coat is on the metalized side and is suitable for flexo printing. The mid liner is a 1.5 mil clear PET. The clear PET adds durability and reduces the overall thickness of the label stock. The base liner is a 50# sck ideal for high speed labeling applications.
This is a piggyback label stock with a standard perm adhesive for window decal or other durable label applications. The face stock is a clear matte laser that can be both press printed and laser printed. The decal will be water resistant and very durable. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. The standard perm will be somewhat removable from smooth surfaces like glass and shelving but permanent to corrugated or other paper surfaces.
This is a piggyback label stock with a standard perm adhesive for window decal or other durable label applications. The face stock is a double matte treated PET that can both laser printed and inkjet printed. The decal will be water resistant and very durable. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. The standard perm will be somewhat removable from smooth surfaces like glass and shelving but permanent to corrugated or other paper surfaces.
This is a piggyback laser and/or inkjet safe blood bag compliant label stock for blood bag applications. Note the blood bag compliant adhesive is on the face stock. The piggyback construction is designed for automatic affixing to forms. Product PBPIJQH088 has the blood bag adhesive on the bottom layer for direct affixing to blood bags.
This is a two mil metallized PET with a TC for flexo and thermal transfer printing. The #657 solvent adhesive is ideal for durable label applications. This construction is a piggyback with a 40# mid liner and a 50# base liner.
This is a two mil matte white BOPP with an inkjet top coating. This top coating allows the label stock to be printed on a wide variety of digital printers including laser, inkjet, and HP Indigo. The adhesive is a mid tack removable that will remove clean from a wide variety of surfaces. The mid liner and base liner are designed to allow the label to be automatically affixed to a carrier.
This is a piggyback label stock with a blood bag FDA compliant adhesive. The face stock is a 3 mil white BOPP that can be both press printed and thermal transfer printed. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. The face stock is tear resistant and water resistant. The adhesive is FDA compliant for blood bag labels. This product should be used when our label is the primary label affixed to the blood bag. Secondary labels do not require the same premium adhesive. New orders should be subject to test. A test should include the printing and the application of the label to the blood bag.
Piggyback label construction with a gloss digital topcoat on a 2 mil PET. Adhesive is a BS5609 compliant permanent adhesive. Midliner is a 1.5 mil clear PET silicone liner.
This is a 2 mil white polyester film with a digital matte laser coating on the face. The adhesive is a laser safe standard perm. The back of the pet film is coated with a void tamper release coating. Ideal for laser printing security labels. The face stock is designed to work with smooth surfaces. Samples of the void tamper are available upon request. This label stock will be durable, water resistant, and scratch resistant. The top coat is compatible with flexo, thermal transfer, LED, and Laser printing. The stock can be offset printed as well. The construction is piggyback for automatic affixing to forms.
This is a piggyback label with a white PET matte laser face stock, permanent all temp heavy coat weight adhesive. Ideal for durable labels including outdoor applications. The face stock is a 2 mil white PET with a matte laser top coat that can be both press printed and laser printed. This material can be die cut and applied on a label applicator at high speed. The label is durable, scratch resistant, and water resistant.
This is a piggyback label with a premium matte laser white PET face stock. The adhesive is a permanent all temp heavy coat weight adhesive. This stock is ideal for durable labels including outdoor applications. The face stock is can be both press printed and laser printed. This material can be die cut and applied on a label applicator at high speed. The label is durable, scratch resistant, and water resistant.
This is a piggyback label stock with a BS5609 certified adhesive for durable label applications. The face stock is a bright white matte laser that can be both press printed and laser printed. The decal is water resistant and very durable. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. The premium durable matte laser coating is intended for harsh environments such as dishwashers or outdoor use.
The face stock is a 2.3 mil white BOPP. The BOPP has a gloss top coat that is both flexo and thermal transfer printable. The mid liner and base liner are 40# sck designed for high speed die cutting and labeling applications.
This is a piggyback white BOPP label product, with a digital matte topcoat. Ideal when printing labels with an inkjet print engine. It is also great for Indigo or laser printing BOPP film stock. This topcoat is also Memjet approved. The white BOPP is water resistant and durable. General perm adhesives are used on both layers, with a 42# midply and 50# carrier.
This face stock is a 2.3 mil white BOPP. The BOPP has a gloss top coat that is both flexo and thermal transfer printable. The mid liner is a 40# sck and the base liner is a 50# sck designed for high speed die cutting and labeling applications. The 622 removable adhesive has long term removability from glass and other smooth surfaces.
This is a 2 mil white PET TC with a "cling" adhesive. The cling adhesive allows for ultra removable properties from a wide variety of surfaces. The mid liner is a 2 mil clear PET with a tighter release. The base liner is a 1.5 mil clear PET with a standard easy release. The PET face stock is printable via flexo and thermal transfer.
This is a piggyback label stock with a standard perm adhesive for window decal or other durable label applications. The face stock is a bright white matte laser that can be both press printed and laser printed. The decal will water resistant and very durable. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. The standard perm will be somewhat removable from smooth surfaces like glass and shelving but permanent to corrugated or other paper surfaces.
This is a piggyback label stock with a BS5609 certified adhesive for durable label applications. The face stock is a bright white matte laser that can be both press printed and laser printed. The decal will water resistant and very durable. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. The standard perm will be somewhat removable from smooth surfaces like glass and shelving but permanent to corrugated or other paper surfaces.
This is a piggyback label stock with an all temp perm adhesive for window decal or other durable label applications. The face stock is a bright white matte laser that can be both press printed and laser printed. The decal will be water resistant and very durable. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. The mid liner is a 1.5 mil clear PET allowing print to be seen on the sheet once the label is removed. The base liner is a 40# sck ideal for automatic affixing.
This is a piggy “half-back” label stock with permanent adhesive and a 50# base liner. Add the face stock of your choice on press. This material can be die cut and applied on a label applicator or applied on a patch applicator with no die cutting. Great to use when you have a specialty substrate such as a blood bag label stock and you need to make it piggyback.
Film Labels
This is a 2.3 mil white BOPP with a glossy printable top coat. There is a metalized layer on the adheisve side to provide for 100% opacity. The adhesive is an all temp mid-tack removable guaranteed to remove clean from your surface. The liner is a 2.5 mil clay coated sheet that is printable on the back side.
This bright white polyester film has a gloss coating on the face. It is flexo printable, thermal transfer printable, and off set printable. The rich white look and coating allows you to print high color. The PET stock is heat resistant, water resistant, and tear resistant. Great for durable labels. Thicker gages and/or alternate adhesives are available upon request.
This is a two mil white PET with a gloss coating for flexo and thermal transfer printing. The adhesive is a general perm for use on a wide variety of applications. The liner is a 50# sck.
This extremely bright white polyester film with a chem treat on the face is ideal for the face stock of a premium label. The chem treatment on the face allows for flexo, thermal transfer, and UV inkjet printing. The adhesive is a general purpose perm. The 40# liner is ideal for high speed die cutting.
This white polyester film has a matte printable face that is flexo, thermal transfer, UV inkjet, and off set printable. The PET stock is heat resistant, water resistant, and tear resistant. Great for durable labels. More than 25% of the raw materials in the face stock are recycled resin from post-consumer PET bottles. The adhesive is a general purpose perm supported by a 40# liner.
This is a 10 mil bright white PET. The PET is chem treated for excellent print-ability. The adhesive is our #601 general perm. The liner is a 40# sck and is excellent for high speed application.
This is a two mil white PET with a gloss top coat for flexo and thermal transfer printing. The adhesive is a heavy coat weight all temp for applications that require a high tack and premium bond. The liner is a 50# sck.
This extremely bright white polyester film with a gloss chem treatment is ideal for the face stock of a durable label The rich white look and coating allows you to print high color. You can also use this face stock for a premium film label. It is heat resistant and water resistant.
This bright white polyester film coated 2 sides is ideal for high quality digital print. The rich white look and coating allows you to both flexo print and digital print high color. This sheet can also be printed on a UV forms press and die cut to make all plastic ID cards, hang tags, or key fabs. It is laser compatible, heat resistant, and water resistant. 2.0 mils to 10.0 mils available upon request. Our FM matte laser coating is food safe and has FDA 175.300 direct food contact approval.
This bright white polyester film with a digital matte universal coating on the face is ideal for the face stock of an ID card, hang tag, or key fob. You can also use this face stock for a premium film label. It is ink jet and laser compatible, heat resistant, and water resistant. The digital top coat works well with several of the digital platforms in the market place including Epson, Memjet, and HP Indigo.
This bright white polyester film with a digital matte universal coating on the face is ideal for the face stock of an ID card, hang tag, or key fob. You can also use this face stock for a premium film label. It is ink jet and laser compatible, heat resistant, and water resistant. The digital top coat works well with several of the digital platforms in the market place including Epson, Memjet, and HP Indigo.
This is a 5 mil gloss white PET laminated to a 20# white bond paper with full gum microsphere adhesive. This product can be die-cut cleanly and be adhesive free once removed. The adhesive stays with the 20# bond. The polyester is extremely durable. With no perfs needed, the PET will not tear. The 20# base sheet is laser and press printable. The white PET is flexo and thermal transfer printable. The white PET film is suitable for both direct and indirect food contact.
This is a 7 mil gloss white PET laminated to a 20# white bond paper with full gum microsphere adhesive. This product can be die-cut cleanly and be adhesive free once removed. The adhesive stays with the 20# bond. The polyester is extremely durable. With no perfs needed, the PET will not tear. The 20# base sheet is laser and press printable. The white PET is flexo and thermal transfer printable.
This extremely bright white polyester film with a matte laser coating on the face is ideal for a film label application. The rich white look and coating allows you to print high color. You can also use this face stock for a premium film label. It is laser compatible, heat resistant, and water resistant. It can be printed laser, thermal transfer, off set, and flexo. This adhesive has a lower coat weight allowing it to be used as a mid-tack removable/perm.
This extremely bright white polyester film with a matte laser coating on the face is ideal for a film label application. The rich white look and coating allows you to print high color. You can also use this face stock for a premium film label. It is laser compatible, heat resistant, and water resistant. It can be printed laser, thermal transfer, off set, and flexo.
This extremely bright white polyester film with a matte laser coating on the face is ideal for a film label application. The rich white look and coating allows you to print high color. You can also use this face stock for a premium film label. It is laser compatible, heat resistant, and water resistant. It can be printed laser, thermal transfer, off set, and flexo. The adhesive is our #325 general perm. The liner is a 50# sck ideal for high speed die cutting.
This extremely bright white polyester film with a matte laser coating on the face is ideal for the face stock of a clean card. The rich white look and coating allows you to print high color. You can also use this face stock for a premium film label. It is laser compatible, heat resistant, and water resistant. This film is laser , thermal transfer, flexo, and offset printable.
This is a 7.0 mil matte laser TC white PET with an all temp perm adhesive and a 3.4 mil clay coated liner. This construction is designed for the production of durable laser labels. The all temp adhesive allows for application of the label in almost any environment.
This is a 7.0 mil matte laser TC white PET with a durable indoor/outdoor adhesive and a 50# sck base liner. This construction is designed for the production of durable laser labels. The durable adhesive allows for the use of the label in almost any environment.
This is a 7.0 mil matte laser TC white PET with a durable indoor/outdoor adhesive and a 3.4 mil clay coated liner. This construction is designed for the production of durable laser labels. The durable adhesive allows for the use of the label in almost any environment.
This extremely bright white polyester film with a matte laser coating on the face is ideal for temporary film label applications. The rich white look and coating allows you to print high color. You can also use this face stock for a premium film label. It is laser compatible, heat resistant, and water resistant. It can be printed laser, thermal transfer, off set, and flexo. This adhesive is a skin-safe mid-tack removable.
This bright white polyester film coated one side is ideal for the face stock of a film label. The rich white look and coating allows you to print high color. This sheet can also be printed on a UV forms press and die cut to make all plastic ID cards, hang tags, or key fabs. It is laser compatible, heat resistant, and water resistant. 2.0 mils up to 10.0 mils available upon request.
This bright white polyester film coated one side is ideal for the face stock of a film label. The rich white look and coating allows you to print high color. This sheet can also be printed on a UV forms press and die cut to make all plastic ID cards, hang tags, or key fabs. It is laser compatible, heat resistant, and water resistant. 2.0 mils up to 10.0 mils available upon request.
This bright white polyester film coated one side is ideal for the face stock of a film label. The rich white look and coating allows you to print high color. This sheet can also be printed on a UV forms press and die cut to make all plastic ID cards, hang tags, or key fabs. It is laser compatible, heat resistant, and water resistant. 2.0 mils up to 10.0 mils available upon request.
This 6mil bright white polyester film coated one side is ideal for the face stock of a film label. The rich white look and coating allows you to print high color. This sheet can also be printed on a UV forms press and die cut to make all plastic ID cards, hang tags, or key fabs. It is laser compatible, heat resistant, and water resistant. 2.0 mils up to 10.0 mils available upon request.
This bright white polyester film coated 2 sides is ideal for high quality digital print. The rich white look and coating allows you to both flexo print and digital print high color. This sheet can also be printed on a UV forms press and die cut to make all plastic ID cards, hang tags, or key fabs. It is laser compatible, heat resistant, and water resistant. 2.0 mils to 10.0 mils available upon request. Our “X” coating and "SC" coatings are scratch resistant and very durable. The combination matte/gloss allows for versality to achieve the look and feel your customer is looking for. The matte side is for toner or UV inkjet only. The SC side can be printed toner or HP Indigo.
This is a 4 mil matte white laser PET laminated to a 20# white bond paper with full gum microsphere adhesive. This product can be die-cut cleanly and be adhesive free once removed. The polyester is extremely durable. With no perfs needed, the PET will not tear. The base sheet is also laser and press printable.
This is a 5 mil matte white laser PET laminated to a 20# white bond paper with full gum microsphere adhesive. This product can be die-cut cleanly and be adhesive free once removed. The polyester is extremely durable. With no perfs needed, the PET will not tear. The base sheet is also laser and press printable.
This is a 7 mil matte white laser PET laminated to a 20# white bond paper with full gum microsphere adhesive. This product can be die-cut cleanly and be adhesive free once removed. The polyester is extremely durable, water resistant, and heat resistant. With no perfs needed, the PET will not tear. The base sheet is also laser and press printable. The matte laser top coat is compatible with flexo, laser, UV Ink Jet, and thermal transfer printing.
CWV2S175 is a synthetic digital polytex. It is a very unique product. Slightly softer than polypropylene but with much more strength and durability, virtually tear-proof . Use this solution when an opaque synthetic label stock is needed.
A dry release film lamination product. The face stock has a digital matte laser topcoat on a 50 micron (2 mil) white PET. The facestock can be flexo, offset, thermal transfer, or laser imaged. The universal dry release from the 50 micron (2 mil) Clear PET, allows for any size or shape of die-cut to be used. This is a durable product, that can be used to make ID bracelets, plant tags, etc.
This is a multi layer film lamination designed for laser compatible wrist bands. The outer layer is a premium matte laser coating on a PET. This coating is resistant to tampering , scuffing, and water. The bottom layer is a soft matte coating that goes against the skin. The inner core is a tear resistant white film for increased durability.
This is a multi layer film lamination designed for laser compatible wrist bands. The outer layer is a premium matte laser coating on a PET. This coating is resistant to tampering , scuffing, and water. The bottom layer is a 7.5 mil white woven film that is tear resistant and soft against the wrist.
This product is a 2 mil clear acetate face stock with a permanent laminating adhesive with good initial tack. The liner is a 1.5 mil clear PET. This product is best used for security applications as the face stock will easily fracture if tampered with.
This is a 7.0 mil Atlas Suretuff synthetic stock that is thermal transfer printable. The adhesive is an indoor/outdoor durable perm. The liner is a 1.5 mil clear PET.
This is a 53# laser latex water resistant face stock. The adhesive is blood bag compliant. The liner is a super lay flat 90# PK. This product is well suited to make laser compatible latex blood bag labels.
Two mil clear pet with a top coat for flexo printing, “cling” adhesive, and a super lay flat liner. Make clear labels that can be used for window decals, temporary product labels, and other applications where you want a film label to be able to be removed clean from virtually any surface. This product is heat resistant and water resistant Excellent clarity. This product can also be produced with other adhesives and/or other film face stocks. The back of the PET has an enhanced primer to make sure the adhesive stays with the face stock in even the most difficult shelf labeling applications.
A 2mil Clear PET film label stock, print treated for flexo print, has a mid-tack removable adhesive and super lay flat liner. This product is ideal for shelf-talker applications that need a strong bond, but can be easily removed. The heavy polycoated liner, provides a good moisture barrier and keeps the product from curling due to extreme climate conditions.
Two mil clear pet with a top coat for flexo printing, mid-tack removable adhesive, and a super lay flat liner. Make clear tag labels that can be used for window decals, temporary product labels, and other applications where you want a film label to be able to be removed clean from virtually any surface. This product is heat resistant, water resistant and holds up well in cold temps with excellent clarity. The back of the PET has an enhanced primer to make sure the adhesive stays with the face stock in even the most difficult shelf labeling applications.
This is a 2.0 mil clear PET with a gloss top coat for Indigo and laser printing. Ideal for high speed production. The gloss top coat is compatible with high color imaging. The adhesive is a laser safe mid tack removable. This is ideal for shelf markers.. The liner is a super lay flat PK liner. The liner will not curl even in cooler environments.The face stock is very durable, water resistant, and tear resistant.
This is a 3.0 mil gloss clear vinyl face stock. The adhesive is a laser safe, outdoor drum label permanent adhesive. The liner is a 6.5 mil PK super lay-flat liner. This product is ideal for digital imaging when a laser topcoat is added. The face stock is very durable, water resistant, and tear resistant. The liner will exhibit excellent lay flat characteristics even under the most difficult conditions.
This is a two mil white void tamper PET film with a matte laser digital coating on the face. The adhesive is a laser safe all temp perm. The back of the PET film is coated with a void tamper release coating. This product is ideal for laser printing, press printing, or thermal transfer printing security labels. The top coating is scratch resistant and water resistant. This product can be laser imaged in both toner based and LED machines. The PK liner will ensure lay flat through virtually any run conditions.
This is a 3.2 mil white vinyl face stock. The adhesive is a laser safe, outdoor drum label permanent adhesive. The liner is a 6.5 mil PK super lay-flat liner. This product is ideal for digital imaging when a laser or inkjet topcoat is added. The face stock is very durable, water resistant, and tear resistant. The liner will exhibit excellent lay flat characteristics even under the most difficult conditions.
This is a 3.2 mil white vinyl film. The adhesive is a laser safe mid tack removable adhesive. The adhesive can be applied in temperatures as low as +15F. This product is ideal for digital imaging when a laser or inkjet top coat is added. The face stock is very durable, water resistant, and tear resistant. The super lay flat PK liner will exhibit excellent lay flat characteristics even under the most difficult conditions.
This is a 3.2 mil white vinyl face stock. The adhesive is a laser safe, "cling" adhesive ideal for window decals and shelf markers. The liner is a 92# PK super lay-flat liner. This product is ideal for digital imaging when a laser or inkjet topcoat is added. The face stock is very durable, water resistant, and tear resistant. The liner will exhibit excellent lay flat characteristics even under the most difficult conditions.
This is a two mil metalized PET with a rainbow hologram. The adhesive is our general perm #601. The liner is a 4.6 mil clay coated lay flat with a smooth easy release. Applications include security and high value labels.
This is a two mil metalized PET with a rainbow hologram. The adhesive is durable outdoor perm #610. The liner is a 50# sck with a smooth easy release ideal for high speed label applicators. Applications include bottle labeling and security labels.
This is a two mil metalized PET with a rainbow hologram. The adhesive is our general perm #325. The liner is a 1.5 mil clear PET with a smooth easy release ideal for high speed label applicators. Applications include bottle labeling and security labels.
This is a two mil clear PET with a heat seal adhesive on the face. The general perm and 40# liner on the back allow for the PET to be applied to the substrate of your choosing.
This is a 2 mil (50 micron) metalized PET with a printable top coat. The adhesive is a general purpose perm. The liner is a 50# sck ideal for high speed die cutting and auto affixing applications.
This product can be used to provide a reflective label for the application of your choice. The 610 adhesive is designed for outdoor use. The one mil PET covering the metal side of the 1/2 mil PET adds both durability and acts as a barrier to the metalized PET. The 40# liner is an easy release waste liner for fast automatic dispensing.
This a 2.0 mil metalized PET that has been top coated for digital printing. The top coat is compatible with laser, LED, and HP Indigo printing. The adhesive is a general purpose perm. The liner is a 4.5 mil clay coated lay flat liner.
This matte laminate has a special top coating for laser, UV inkjet, and thermal transfer printers. It is also signature compatible. The matte coating by its nature is universal for laser and thermal transfer printers and will help reduce static. The adhesive is a general purpose perm with good wet out properties. The base liner is a 40# sck ideal for high speed die cutting.
2 mil clear PET with no top coating. This is untreated polyester film with a high gloss appearance. A premium toner top coat will be needed for laser compatibility. This film can also used to laminate label face stocks for increased durability.
This is a five mil clear PET with a gloss chem treatment. The adhesive is a standard general perm. The liner is a 40# base liner designed for high speed die cutting. This product is ideal for window decal applications.
This is a 2.6 mil 56# Bright Silver Metallized High Gloss Paper. A print primer has been added to the face sheet to allow for high color graphics. The adhesive is a general purpose perm with some short term re-position ability. The liner is a 1.5 mil clear PET ideal for automatic application.
This is a 1/2 mil clear PET with high shear solvent replacement water based acrylic permanent adhesive and 40# liner. Excellent for low energy surfaces. This is ideal for making clear labels and can be used to laminate over the substrate of your choice. This product is water resistant and tear resistant. Excellent clarity.
This is a 2.0 mil clear PET chem treated for flexo and thermal transfer printing. The adhesive is rated for high heat resistance and used for both indoor and outdoor applications. The adhesive can be pattern coated upon request. The liner is a 40# sck.
2 mil clear PET top coated for flexo and thermal transfer. The adhesive is a premium outdoor with strong adhesion qualities. The liner is a 50# sck ideal for high speed die-cutting and application.
2 mil clear PET top coated for flexo and thermal transfer. The adhesive is a premium outdoor with strong adhesion qualities. The liner is a 1.5 mil clear PET ideal for high speed die-cutting and application.
This is a 1/2 mil clear PET with no top coating. The adhesive is a heavy coat weight #610 perm. The adhesive is rated for outdoor use. The liner is a 1.5 mil clear PET silicone. The PET liner allows for high speed die cutting and a clear film lamination.
This is a 7mil Clear PET with a mid-tack removable adhesive and 3.4mil Clay coated liner
This film is Phthalates free and is flexo printable.
Two mil clear pet with a top coat for flexo printing, “cling” adhesive, and a 40# sck liner. Make clear labels that can be used for window decals, temporary product labels, and other applications where you want a film label to be able to be removed clean from virtually any surface. This product is heat resistant and water resistant Excellent clarity. This product can also be produced with other adhesives and/or other film face stocks. The back of the PET has an enhanced primer to make sure the adhesive stays with the face stock in even the most difficult shelf labeling applications.
This is a two mil clear PET with a heat seal adhesive applied to the face of the PET. The heat seal coating is a water based polyurethane chemistry. It is designed to function as a heat seal laminating adhesive. On the back of the PET is our #601 general perm and a 40# liner. You can laminate the PET to the substrate of your choice and expose the heat seal coating for further processing.
This a 1/2 mil metalized PET with a highly reflective surface. The adhesive is our #610 outdoor perm. The liner is a high speed waste liner ideal for both high speed die cutting and easy removal when needed.
This is a 2.0 mil clear BOPP that is flame treated. It can be press printed or thermal transfer printed. The adhesive is a standard general purpose perm. The adhesive can be pattern coated as needed. The liner is a 40# sck designed for high speed die cutting and application,
This is a 3/4 mil clear BOPP that can be printed and/or used as an over laminate. The all temp adhesive has excellent initial tack and wet out. The base liner is a 40# ideal for either die cutting or removing as a waste liner.
This label stock is a 2 mil clear BOPP with a direct thermal top coat. The direct thermal top coat is excellent for image quality. The image is very dark and dries fast. This coating is water resistant. Our #325 standard perm and 40# liner fit most applications.
This is a 2.0 mil clear BOPP that is flame treated. It can be press printed or thermal transfer printed. The adhesive is skin safe and can hold up in outdoor use. The liner is a 4.6 mil clay coated lay flat that can be press printed.
This is a 2.0 mil clear BOPP that is flexo and thermal transfer printable. The 611 adhesive is a mid-tack removable and the liner is a 1.5 mil clear PET ideal for high speed die cutting. This film label stock can be used as a window decal or a clear over laminate.
This is a two mil clear BOPP flame treated to be printable via flexo and/or thermal transfer. The adhesive is a mid-tack removable. This product makes for a nice window decal. The BOPP is water resistant and tear resistant. The liner is a 40# sck.
This is a two mil clear BOPP flame treated to be printable via flexo and/or thermal transfer. The adhesive is a mid-tack removable. This product makes for a nice window decal. The BOPP is water resistant and tear resistant. The liner is a 4.6 mil clay coated lay flat that can be press printed.
This is a two mil clear BOPP flame treated to be printable via flexo and/or thermal transfer. The adhesive is a "cling" ultra-removable. This product makes for a nice window decal. The BOPP is water resistant and tear resistant. The liner is a 40# sck.
This is a two mil clear BOPP flame treated to be printable via flexo and/or thermal transfer. The adhesive is a "cling" ultra-removable. This product makes for a nice window decal. The BOPP is water resistant and tear resistant. The liner is a 4.6 mil clay coated printable label stock.
This is a two mil clear BOPP flame treated to be printable via flexo and/or thermal transfer. The adhesive is a mid-tack removable. This product makes for a nice window decal. The BOPP is water resistant and tear resistant. The liner is a 4.6 mil clay coated lay flat that can be press printed.
This a 2.3 mil white BOPP with a printable top coat. The BOPP can be printed flexo and is thermal transfer receptive. The adhesive is a rubber based perm with high initial tack and a strong bond to low energy surfaces.The liner is a 40# with an easy release.
This is a 3 mil white matte polypropylene with a clay coated surface for excellent print-ability. The face can be printed via flexo, offset, screen, thermal transfer, and UV inkjet. The adhesive is a high tack perm. Applications include drum labels. This is an excellent choice for the most difficult label applications. The liner is a 42# sck 2.5 mil base desgined for high speed die cutting and application.
This white BOPP film with a digital top coat is ideal when printing labels with an inkjet print engine. It is also great for Indigo or laser printing bopp film stock. This coating is also Memjet compatible. The white bopp is water resistant and durable. The all temp adhesive allows for high initial tack on most any surface.
This is a 2.3 mil white top coated gloss BOPP. This face stock is flexo and thermal transfer printable. The face stock is tear resistant and water resistant. The #611 adhesive is a mid-tack removable. The 40# liner is designed for high speed die cutting and application.
This is a 2.3 mil white top coated gloss BOPP. This face stock is flexo and thermal transfer printable. The face stock is tear resistant and water resistant. The #601 adhesive is a general purpose perm. The 40# liner is designed for high speed die cutting and application.
This is a 2.3 mil white top coated gloss BOPP. This face stock is flexo and thermal transfer printable. The face stock is tear resistant and water resistant. The #601 adhesive is a general purpose perm. The liner is a laser printable 4.6 mil lay flat.
This product is a 3 mil matte coated white BOPP that works very well with both flexo and thermal transfer printing. The face stock is tear resistant and water resistant. The adhesive is mid tack removable ideal for shelf marking and other removable label applications. . The liner is a 4.5 mil 78# ideal for high speed die cutting and sheeting.
This product is a 3 mil matte coated white BOPP that works very well with both flexo and thermal transfer printing. The face stock is tear resistant and water resistant. The adhesive is a premium all temp adhesive that can be applied in a
freezer environment. The liner is a 40# sck.
This is a 2.3 mil white top coated gloss BOPP. This face stock is flexo and thermal transfer printable. The face stock is tear resistant and water resistant. The #50610 perm is a high performance outdoor adhesive used for the most difficult label applications. The 40# sck liner is an ideal base liner for die cutting.
This is a 2.3 mil white BOPP film. The 614 adhesive is a laser safe mid tack removable. The adhesive can be applied in temperatures as low as -10 degrees celcius. The adhesive can be removed clean from glass and other smooth surfaces. The liner is a 4.6mil lay flat liner for sheeting capabilities. The face stock is durable, water resistant, and tear resistant. The adhesive can be pattern coated for custom applications.
This is a 3 mil white top coated gloss BOPP. This face stock is flexo and thermal transfer printable. The face stock is tear resistant and water resistant. The #614 adhesive is a mid-tack removable. The liner is a 4.6 mil clay coated layflat liner
This product is a chem-treated 2 mil PET with mid-tack removable adhesive and 42# CCK liner. Can be used for shelf talkers and window decals. Can be printed via flexo or thermal transfer.
This product is a chem-treated 2 mil PET with mid-tack removable adhesive and 42# CCK liner. Can be used for shelf talkers and window decals. Can be printed via flexo or thermal transfer.
2 mil clear laser top coated gloss PET/#601 perm/1.5 mil clear PET liner. Ideal for clear labels. The face stock can be printed via flexo, thermal transer. UV inkjet, HP Indigo, or laser. The PET base liner is ideal for high speed application.
This is a 3.0 mil clear gloss vinyl film. The adhesive is a laser safe mid tack removable adhesive. The adhesive can be applied in temperatures as low as -10 F. The liner is a 4.6 mil clay coated base. The face stock is very durable, water resistant, and tear resistant. The liner is printable via flexo, offset, and even some laser. The clay coat allows for optimal feeding inside production digital equipment. Lay flat should be tested when digital printing.
This is a 3.0 mil clear gloss vinyl film. The adhesive is a laser safe mid tack removable adhesive. The adhesive can be applied in temperatures as low as -10 F. The liner is a 1.5 mil clear PET. The face stock is very durable, water resistant, and tear resistant. The adhesive is ideal for window decals and shelf markers.
This is a two mil white void tamper PET film with a matte laser/thermal transfer digital coating on the face. The adhesive is a laser safe all temp perm. The back of the PET film is coated with a void tamper release coating. This product is ideal for laser printing, press printing, or thermal transfer printing security labels. The top coating is scratch resistant and water resistant. This product can be flexo and thermal transfer printed.
This is a 3.2 mil white vinyl face stock. The adhesive is a laser safe, outdoor permanent. The liner is a 3.4 mil clay coated lay-flat liner. The face stock is very durable, water resistant, and tear resistant. The liner is printable via flexo, offset, and even some laser. The clay coat allows for optimal feeding inside production digital equipment.
The face stock is a 3.2 mil white vinyl with a matte digital top coat. This top coat is printable with all aqueous based inkjet printers, laser printers and HP Indigo. The top coat is absorbent enough to laser print twice if need be. The adhesive is a laser safe perm for outdoor use. The liner is a 3.4 mil clay coated lay flat. This stock is durable, water resistant, and tear resistant. The liner is printable via flexo, offset, and even some laser. The clay coat improves printer feed.
The face stock is a 3.2 mil white vinyl with a matte digital top coat. This top coat is printable with all aqueous based inkjet printers, laser printers and HP Indigo. The top coat is absorbent enough to laser print twice if need be. The adhesive is a laser safe perm for outdoor use. The liner is a 4.6 mil clay coated lay flat. This stock is durable, water resistant, and tear resistant. The liner is printable via flexo, offset, and even some laser. The clay coat improves printer feed.
This is a 3.2 mil white vinyl film. The adhesive is a laser safe mid tack removable adhesive. The adhesive can be applied in termperatures as low as -10 degrees celcius. The liner is a 3.4 mil clay coated base. The face stock is very durable, water resistant, and tear resistant. The liner is printable via flexo, offset, and even some laser. The clay coat allows for optimal feeding inside production digital equipment. Lay flat should be tested when digital printing.
This is a 3.2 mil white vinyl face stock. The vinyl is very durable, water resistant, and tear resistant. The adhesive is a laser safe outdoor tackified perm for drum labeling and other difficult applications. The liner is an 8 tpt tag lay flat. The back side can be laser or press printed. This stock is ideal for digital imaging when a laser or inkjet top coat is added.
The face stock is a 3.2 mil white vinyl with a matte digital top coat. This top coat is printable flexo, thermal transfer, and laser. The top coat is scratch resistant and water resistant. The adhesive is a laser safe perm for outdoor use. The liner is a 4.6 mil clay coated lay flat. This stock is durable, water resistant, and tear resistant. The liner is printable via flexo, offset, and even some laser. The clay coat improves printer feed.
This is a 2mil (50mic) White PET film label stock with a matt inkjet top coat. The top coat is inkjet printable with both dye and pigment inks. Ideal for Memjet print engines as well as HP Indigo. This multi platform top coat is also laser printable. This has a standard perm adhesive and is compatible with the digital production machine of your choice. Other adhesive and liner options are available depending on the application.
This is a 3.0 mil white PET that is chem treated for flexo and thermal transfer printing. The adhesive is a mid-tack removable. This product can be used on clean/dry surfaces such as metal shelving and floor graphics. The liner is a 4.6 mil super lay flat laser sheet. This product is laser compatible, heat resistant, and water resistant. This product is designed to produce floor graphics.
This extremely bright white polyester film with a matte laser coating on the face is ideal for a film label application. The rich white look and coating allows you to print high color. You can also use this face stock for a premium film label. It is laser compatible, heat resistant, and water resistant. It can be printed laser, thermal transfer, off set, and flexo. The adhesive is our #601 general perm. The liner is a 3.4 mil clay coated laser sheet that can be flexo or laser printed.
This is a 2 mil bright white polyester film with a digital matte laser coating on the face. The adhesive is an all temp removable approved for direct food contact and ideal for shelf markers. The liner is a 3.4 mil lay flat laser sheet. This product is laser compatible, heat resistant, and water resistant. The digital top coat works well with IGEN, Nexpress, and other color lasers. This product is designed to produce long lasting durable laser labels that can be removed cleanly from smooth surfaces such as shelves.
One mil matte clear PET with a premium matte laser top coat. The adhesive is a mid tack removable for shelf marking applications. The liner is a 4.6 mil clay coated lay flat that can be flexo and/or laser printed.
Gloss clear PET 2 mil laminate that is printable via UV Inkjet, flexo, and thermal transfer. The GL top coat can be laser printed in most machines as well. The adhesive is a general purpose perm with excellent clarity. The liner is a 40# sck with a smooth release.
This is a 3 mil clear PET that has not been treated and does not have a topcoat. The raw polyester film has an extra gloss appearance and is laser compatible, but cannot accept toner or signature. This film can also be used to laminate label face stocks for extra durability. The construction features an all-temp, high performance adhesive with a 50# SCK liner. Please note, the liner will be wound out unless otherwise noted.
Laminate a 5 mil clear PET to the substrate of your choice. The 5 mil clear PET is both thermal transfer printable and flexo printable. The adhesive is high shear with excellent wet-out properties.
This is a 3/4 mil clear BOPP with an all temp permanent adhesive and a 40# liner. This is ideal for making clear labels that can be used to over laminate the substrate of your choice. This product is water resistant and tear resistant. Excellent clarity. Great for bottle labels too.
Super Clear PET for integral cards or labels on press. The laminate has premium special high gloss top coating for laser, flexo, and thermal transfer printing. This topcoat is used where ultimate clarity and gloss are a must and will still accept variable printing. Designed for color laser printers and HP Indigo. This is our most popular face laminate when high color print is used. Wet out is very good. This laminate makes your print look great. The adhesive is a premium outdoor grade that is skin safe and resistant to yellowing.
This is a piggyback white BOPP label product, with a digital matte topcoat. Ideal when printing labels with an inkjet print engine. It is also great for Indigo or laser printing BOPP film stock. This topcoat is also Memjet approved. The white BOPP is water resistant and durable. General perm adhesives are used on both layers, with a 42# midply and 50# carrier.
2 mil clear PET chem treated/Heat Seal one adhesive one side. The heat seal is a water based coating designed to function as a heat seal laminating film. A fiber tearing bond can be achieved under conditions such as 275F, 1 second at 40 psi.
This is a 2.0 mil chem treated PET with a silver metalized coating one side. This film is ideal for use in production of metalized PET labels. Add the adhesive of your choice to the metalized side. The chem treat allows for flexo printing and/or thermal transfer printing on the face of the label.
This 8 mil white BOPP has a label grade direct thermal top coat. The 8 mil white BOPP is water resistant and durable. This label stock is a good choice for durable direct thermal label applications. The 8 mil is suitable for two sided printing and is tear resistant.